Broco PC/TFHBL Transfill Hose with Gauge and Bleed Valve

Description

Typical application (as assembled) is for refilling the oxygen bottles from a master oxygen tank for the Broco PC/A-5V2HR Rescue and Recovery Torch Kit that is used in many armed forces and civilian emergency rescue cutting operations.
Can be used for the filling of other pressurized tanks by changing the adapters on the ends. One of these applications is the refilling of paint ball pressurized tanks after changing the ends to match your equipment.
This refill hose assembly uses CGA 540 Oxygen connections at both ends with an attached pressure gauge and bleed valve for releasing pressure in the connecting hose between cylinders once the service cylinder has been charged with oxygen (or other gas supply tank with proper fittings) from the supply cylinder.
3,000 PSI (minimum) rating on all components.
This assembly can also be used with other adapters (such as a CGA-870) to fill medical oxygen cylinders as well as Keep Alive 15" Oxygen Cylinders that use the CGA-540 valve assemblies.
Can be used to fill other oxygen cylinders that are equipped with either CGA-870 or CGA-540 valves.
CGA 540 Medical Oxygen cylinders are typically on larger cylinders, like the "H" and "T" series.
The included CGA 540 adapters utilize "O" rings on sealing port surfaces and DO NOT require the use of wrenches to effect a positive seal when transferring gases between cylinders.
CGA Adapters can be easily be purchased and replaced for use in the filling paintball supply cylinders from a "master" cylinder....