Field Repair Combo Kit 1 for Hydraulic 2-Wire Braided Hose - (4) 3/8" & (2) 1/2"

Description

Field Repair Combo Kit #1 for Hydraulic 2-Wire Braided Hose
(4) Reusable 3/8 Inch & (2) Reusable 1/2 Inch
Hydraulic Hose Repair Kits Included
4-each 3/8" 2-wire Reusable #6 Hydraulic Hose Repair Kits
2-each 1/2" 2-wire Reusable #6 Hydraulic Hose Repair Kits
For use with double wire braided hydraulic hoses rated at 4000psi
Do not use on super high-pressure skive hose
Great to use for snow plows, log splitters, auto transport trailers etc
TWO SIZES INCLUDED:
Four each - use with 3/8 inch Inside diameter hose & outside diameter should be .68 inches
Two each - use with 1/2 inch Inside diameter hose & outside diameter should be .81 inches
Use the same fittings the field repair technicians use when they charge you 0 for a service call!
What you will also want in your field repair toolbox (not included with kit!)
-1 pair of vice grip pliers
-2 medium-sized adjustable wrenches
-Something to cut the bad line with... best thing you could have is an air die grinder with an air hose with glad hand fittings on the end so you can connect to your truck's air.
-Clean up rags
-Oil spill kit (yup, we sell those too!)
Guidelines:
Make sure you power down the pump before you start!
Cut hose in half about a half inch on either side of the leak.  The ferrules (collars) are reverse threaded, so LEFTY tighty.  Screw these all the way so the hose end comes up to the top of the wide part of the ferrule.