HiBoost Home F20G-5S-BTW 15K Cell Phone Signal Booster

Description

HiBoost 15K Smart Link Carrier Quality Cell Phone Signal Boosters
Note: If no coverage outside (no service, no signal bars), a cell phone signal booster is not likely to help.
The HiBoost 15K was fundamentally designed to help maximize your 3G and 4G LTE signal by providing the most powerful consumer solution. Ideal for customers with weak outdoor signal. The maximum gain is 70 dB and it has the capability to cover up to 15,000 square feet.
Increase 3G and 4G LTE cellular signal strength on any cellular device by installing a Smart Link signal booster. Integrate a reliable and affordable in-building wireless solution to improve cellular signal in small and large homes or offices.
Users can boost signal for any type of cellular device on any network such as AT&T, T-Mobile, Verizon, Sprint and US Cellular. Improve data speeds and voice quality for cell phones, tablets and hot spots.
Each Smart Link kit includes two HiBoost 400 Low-Loss Coaxial Cables that have a heavy-duty outer installation and type N-connectors. These cables protect the cell phone signal booster system from rain, snow, dirt and dust.
The booster has an integral aluminum design that acts as a heat sink for the unit. High heat components on the Smart Link circuit board are carefully bonded to the aluminum chassis to ensure that the system can remain cool during operation.
The Smart Link cell phone booster series integrates carrier grade components to maximize performance.
It is an bluetooth/wi-fi enabled booster that shows real-time gain and power output performance on a LCD Display and remotely from the Signal Supervisor app.
The signal meter tool on the HiBoost Signal Supervisor app will help users find the best position for the outdoor antenna. Ensure that the booster is performing properly by setting up push-notifications and monitoring your booster from anywhere at all times.
Dedicated Technical Support: Need help with installing a booster? Chat with the HiBoost technical support directly from the Signal Supervisor app for remote troubleshooting.
With 5 bars of outside signal Coverage inside will be 15,000 sq.ft.
With 3 bars of outside signal Coverage inside will be 11,000 sq.ft
With 1 bars of outside signal Coverage inside will be 7,000 sq.ft or less.
With 0 bars of outside signal Coverage inside will be 0 sq.ft
Working Bands:
698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 UL
Frequency Range:
728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 DL
Frequency Range:
Band 12 / Band 13 / Band 5/ Band 25-2 / Band 4
Supported Standards:
CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all other cellular standards
FCC Notice
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Please note:
The four largest carriers (Verizon, AT&T, T‑Mobile, and Sprint) and more than 90 regional carriers have given blanket consent for use of all boosters that are certified to the 2013 FCC standards. Go to our Cell Phone Signal Booster Registration page and follow the links for your carrier. There are
no fees
to register your cell signal booster.