-40%
Tri Band Booster GSM 900 DCS/LTE 1800 WCDMA 2100 MHZ Cell Phone Signal Repeater
$ 83.42
- Description
- Size Guide
Description
Before buying please note!1).Please make sure the frequency band of your sim card is suitable for this item.
2).Please make sure on your outside house can getting good signal that you want to amplify.On your cellphone can show 3~5 bar signal (at least catch -70dB~-90dB).Otherwise the booster can not improve your signal
What's in the package:
1). 1* 900/1800/2100 Tri Band Booster
2). 1* Power Supply
3). 1* English User Manual
4). 1* Outdoor LPDA Antenna
5). 1* Indoor Panel Antenna
6). 1* 13 Meters Cable
Booster Specification:
1).Frequency Range Uplink: 890~915/1710~1785/1920~1980MHz
2).Frequency Range Downlink:935~960/ 1805~1880/2110~2170MHz
3).Gain: 65dB
4).Output Power: 20dBm
5).Power Adapter: EU/US/AU/UK Plug
6).Power supply: AC:110~220V; DC:12V 2A
7).Connector Type: N Female
8).Coverage: Up to 500 sqm without barrier
9).Band number: Band 8/Band 3/Band 1
Outdoor LPDA Antenna:
Frequency Range:800~2700MHz
Gain:10dBi
Connector Type: N Female
Cable Length: 0.3 Meters
Antenna Type: Outdoor LPDA Antenna
Waterproof: Yes
Indoor Panel Antenna:
Frequency Range:700~2700MHz
Gain:8dBi
Connector Type: N-male
Cable Length: 2 Meters
Antenna Type: Indoor Panel Antenna
13 Meters Coaxial Cable:
Connector Type: N-male to N-male
Impedance: 50ohm
Cable Color: White
Cable Length: 13 Meters
Cable Type: RG6 Coaxial Cable
How it work:
1). The outdoor antenna received the mobile signal from signal tower.
2). The booster receives the outside signal from the outside antenna.
3). The booster improve the outside signal and send it to the indoor antenna.
4). The indoor antenna broadcasts the boosted signal to devices inside the home.
Easy 4 steps of installation:
1). Find an appropriate position where can getting strong mobile signal to install the outdoor antenna and toward to the cell signal tower. (usually installed it on the roof or balcony and at least 3 bars signal indicated on your phone display).
2). Connect the outdoor antenna to the signal booster via the cable.
3). Connect the indoor antenna to the signal booster.
4). Check all the connectors is tightened then plug in power. Done!